Reinforcement StirrupRebar/ro

Other languages:
Bent Shape Rebar
Helical Rebar
Arch

Arch Rebar Stirrup

poziția meniului
Arch → Rebar tools
Ateliere
Arch, BIM
scurtătură
Nici unul
Prezentat în versiune
0.17
A se vedea, de asemenea,
Helical Rebar, Rebar

Descriere

Instrumentul Stirrup Rebar permite utilizatorului să creeze un 

stirrup reinforcing bar în elementul de structură.

This tool is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager.

Cum se folosește

  1. Creează un element structure
  2. Select any face of the structure
  3. Then select Stirrup Rebar from the rebar tools
  4. A task panel will pop-out on the left side of the screen as shown below
  5. Select the desired orientation
  6. Give the inputs like left cover, right cover, top cover, bottom, front cover, bent angle, bent factor, rounding and diameter of the rebar
  7. Select the mode of distribution either amount or spacing
  8. If spacing is selected, a user can also opt for custom spacing
  9. Pick selected face is used to verify or change the face for rebar distribution
  10. Click OK or Apply to generate the rebars
  11. Click pe Cancel ieșirea din task panel

Task panel for the tool

Proprietăți

Scrip-Programare

See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.

Instrumentul Stirrup Rebar poate fi utilizat în macros și de la consola Python prin utilizarea următoarei funcției: 

Rebar = makeStirrup(l_cover, r_cover, t_cover, b_cover, f_cover,
                    bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
                    structure=None, facename=None)
  • Adds a Stirrup reinforcing bar object to the given structural object.
  • If no Structure and Facename is given, it will take user selected face as input.
  • Here CoverAlong argument is having type tuple.
  • Returns the new Rebar object.

Exemplu: Crearea unei armături tip Stirrup rebar. 

import Draft, Arch, Stirrup

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = Stirrup.makeStirrup(20, 20, 20, 20, 20,
                            115, 4, 8, 2, True, 10, Structure, "Face6")

Edition of the rebar

Schimbarea proprietăților barei Stirrup. 

editStirrup(Rebar, l_cover, r_cover, t_cover, b_cover, f_cover,
            bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
            structure=None, facename=None)

import Stirrup

Stirrup.editStirrup(Rebar, 20, 20, 20, 20, 50,
                    100, 4, 14, 8, True, 8)


Bent Shape Rebar
Helical Rebar
Arch
BIM
User documentation